Parking guidance system is an intelligent parking solution developed by KEYTOP.Ultrasonic detector is installed above every parking space to detect real-time parking status and send signal to LED indicator for showing green for vacancy,red for occupancy.Inside the car park,there are installed with indoor LED display to tell drivers which direction to go.
WELCOME TO CONTACT US FOR SOLUTION DESIGN AND COMPETITIVE OFFER.
save fuel money less wear on vehicles reduce parking frustration greater safety and peaceful mind less traffic congestion at entrance real-time assistance of parking guidance save time in finding a vacant parking lot
For Car Park Manager
Increase parking revenues encourage repeated visits lower staff costs for management enhance image of car park complex increase vehicle rotation of parking lots real-time monitoring of car park running make full use of every parking space
Our parking guidance system provides 2 communication way for you to select.
1.RS485 RS485 uses shielded twisted pair to connect ZCUs in the carpark,all together connected “hand in hand” and finally send their output to CCU.RS485 has good quality of anti-noise,long transmission distance and multi-station capabilities.The biggest advantage is the low cables costs.
Network cables are used to connect multiple ZCUs in the parking lot,separated by the network switches for parallel communication with high rate and transmission speed is higher than RS485 communication.
Installed in the middle of every parking space to detect real-time parking status.Ultrasonic detector is with RS485 communication way.With one-stop accessories include plastic seat,7P blue/white wire connection and RJ45 adapter plate for fast installation.
These 2 traditional split ultrasonic detector can work alone with LED indicator without controller.
Installed in the middle of every parking space to show real-time parking status.Green for vacancy,red for occupancy.We can set RGB colors for this LED indicator through CCU software configuration.
Zone Control Unit(Model:KEY-H07.1/KEY-H07.2)
Zone control unit(ZCU) collects real-time parking data from ultrasonic detector and then transfer to central control unit(CCU) for processing.Also connect with CCU and LED display,to transfer command of available parking spaces to LED display.There are 2 communication way:RS485 and TCP/IP.
Each ZCU maximum can support 60 ultrasonic detector(on the condition that the max. distance from ZCU to end of ultrasonic detector is within 150m).Inside the ZCU there are 2 control board and 1 power supply,we can check real-time working status of ultrasonic detector from LCD screen.Also check the communication status between ultrasonic detector and ZCU,CCU and ZCU.
Central Control Unit(Model:KEY-C02.1/KEY-C02.2)
Central control unit is the core of parking guidance system,it proceed all parking data and release command of available parking spaces to ZCU,then through ZCU transfer to LED display.Each CCU can support 60 ZCU at most.There are 2 communication way:RS485 and TCP/IP.
Premium edition CCU is embedded with B/S structure parking management software,it can save parking data directly for 2 years and support online visit anytime anwhere has internet access.We can download and export reports in Excel format.
Function of B/S strcuture parking management software
Parking Guidance LED display guides the drviers to enter and park at the available parking spaces in the shortest time,increaes parking ultilization,optimize parking environment and improve customers’ satisfaction.
Real-time Monitoring of Parking Space Status System can display real-time parking occupancy,count the number of occupied and available parking spaces of the carpark,give statistics on the volume of vehicles’ entry and exit,which facilitate the monitoring and deployment of personnel in the car park
Statistics Give the statistic of daily and monthly usage as well as sub-period usages of the car park,convenient for the car owners to understand the parking system usage.
Parking Time Detection Count the time after the car enters the parking lot. Carpark manager can know parking information in the control room at any time.
Rights Limits Control Multi-level rights control limit function is effective for the control and maintain the confidentiality of relevant information.
Third-party Integration If you take communication way TCP/IP,we can provide data socket for you to make integration with third-party system/devices.
Indoor LED Display
Installed in the crossings of driveway to show real-time available parking spaces in each area/zone.
Outdoor LED Display(Model:KEY-P10.1/KEY-P10.2)
Installed at the main entrance of car park to show vacant parking spaces of the whole car park or every floor.
Outdoor LED Display(without casing)
Show 3 digits to display real-time available parking space
Our system is user-friendly design with one-stop accessories to help you install the complete parking guidance system fast,it can reduce much installation time,also lower the labor costs.
8*0.5mm,3 meters long,both ends with crystal heads.Used for connections among CCU,ZCU,LED Display,Sensor-Sensor.568B:white/orange,orange,white/green,blue,white/blue,green,white/brown,brown.
4*0.5mm,3 meters long.Telephone line is used for connecting traditional ultrasonic detector and LED indicator.
Sensor Wire Box
3 link,easy to fasten ultrasonic detector onto KBG/Metal Pipe.
Lamp Wire Box
1 link,easy to fasten LED indicator onto KBG/Metal Pipe.